Diverse motordelen
-
€0.40Nut crankshaft / inertia wheel Tomos. Pay attention: Do you have a model with an oilpump? In this case you need to order the inertia wheel nut with a connector for the oil pump. Learn More -
€12.95The banjo bolt connects the oil hose to the manifold. Check the state of the banjo bolt (might have to be replaced). Always replace the 2 sealing rings, this avoids leakage. Learn More -
€14.85The banjo bolt is the part which connects the oil hose to the manifold. Check the state of the banjo bolt (might have to be replaced). See illustration 2, part numbers 3 & 4 Learn More -
€59.95Kickstart cover Tomos Suitable for both the Kickstart and e-start models. Pay attention: There might be some scratches on the varnish, this is because of the sometimes mediocre packaging in the Tomos factory. Learn More -
€2.45Fitting bush for the Tomos a3 / a35 / a55 engine block / carter. These ensure proper fitting for the carters and the covers. There are 2 fitting bushes in the clutch cover There are 2 fitting bushes in the inertia wheel cover There are 2 fitting bushes in between the middle carters. The fitting bushes can start to jam, this is normal. By (carefully) knocking with a plastic hammer, you can loosen the carters and/or covers. Greasing with heat resistant copper grease is recommended. Learn More -
€1.25Sealing rubber oil pump hoses Tomos. Learn More -
€8.00Cover cap oil pump Tomos A35 BLACK. See illustration 2, part number 45. Learn More -
€1.70Benzineslang paars 1 meter.
Tip: Altijd slangenklemmetjes vervangen, voorkom lekkage.
Plaats een benzinefilter tussen de slang en maak de kans op een vuile carburateur een stuk kleiner. (neem in dat geval 4 klemmetjes).
Learn More -
€22.00Membrane gasket Tomos A35. A-Quality. Tip: Order 2, one for in between the cylinder and the membrane and one for in between the membrane and the manifold. See illustration 2, part number 34 Learn More -
sale
Regular Price: €109.95
Special Price €79.95
Out of stock
The banjo bolt is the part which connects the oil hose to the manifold. Check the state of the banjo bolt (might have to be replaced). See illustration 2, part numbers 3 & 4 Learn More
