Zuiger
-
€0.40Pistonpen spring. Sometimes called the circlip as well. There are two springs in the piston. Always renew these when (de-)mounting the piston. See illustration 2, part number 17. Tip: - When (de-)mounting, always put a ball of paper in the crankcase. This way they can never get stuck in the engine. - Order 1 or 2 extra springs, because if they get lost you will be looking for a while. Available in 2 sizes: Pen 10 : For old type engine blocks with a 10mm piston pen (s-25 / 1 speed) Pen 12 : For all new type engine blocks with a 12mm piston pen (a35 en a55, 2 speed). Learn More -
€37.49Piston 44mm / 65 cc. Suitable for all Tomos A55 models with a 44mm Airsal/Eurokit cylinder. (Tomos models: Revival TS, Youngst'R TS, Funtastic, Streetmate). Pen 12. Complete with piston springs, piston pen and 2 piston pen springs. Tips: - New piston? Always replace the needle bearing of your piston pen and gasket set. - Grease the stud bolts with copper grease. - Break in carefully! Grease your piston and cylinder walls with 2-stroke oil when mounting. - During the break-in period, add extra oil to your gasoline. Learn More -
-
€8.50Schroefdraad borgmiddel 10ml Extra sterk. (Mod. Loctite)
Voor alle gangbare moer- en schroefmaten van alle kwaliteiten. Voorkomt ongewenste losraken van de schroef. Bestand tegen losraken door trillingen.
Met een breed temperatuurbereik van -60 °C tot +150 °C. Wordt snel en betrouwbaar hard.
Toepasbaar op geoliede oppervlakken. Dichtschroeven af, voorkomt lekken en heeft een goede chemische bestendigheid.
Learn More -
€7.50Kabelschoen assortiment 102-delig
Learn More -
-
€22.00 -
€64.95Piston Tomos A55 original Suitable for both the 25 and 45km mopeds. Learn More -
€0.00Manifold Tomos A55 25km / 45km 45 km manifold is without stricture, so is very suitable for improving the performance of your moped. Learn More -
€6.00Piston springs for the 38mm / 50cc cylinders. Fits all Tomos models with an A55 engine block. ( Revival TS, Youngst'R TS, Streetmate, Funtastic ) Tips: - New piston springs? Always replace the gasket set and if needed the needle bearing and piston pen springs as well. - Grease the stud bolts with copper grease! - Break in calmly! Grease your piston and cylinder wall with 2-stroke oil when mounting. - Add extra oil to your gasoline when breaking in. Learn More
