Koppeling + aandrijving
-
€39.95Cogwheel second gear See illustration, part number 11 Learn More -
-
€1.90These pins can be worn out, which creates 'room', relative to the clutch segments and the clutch base plate. This can cause the rattling noise your moped makes. Per gear, there are 3 of these pins, so 6 in total. If you are going to replace the segments of your Tomos clutch, it is best to replace these pins as well. See illustration 2, part number 12 Learn More -
€44.00Tomos propulsion plate first gear (Cage) The propulsion axis is mounted to this part. On this part the curved spring will be mounted. See illustration 2, part number 5. Learn More -
€10.00Spring kickstart pinion / brake spring Tomos Learn More -
€19.00Needle bearing for installation in the clutch case. Suitable for all Tomos models. See illustration 1, part number 9. Learn More -
€10.00Spacer Tomos front cogwheel. Often have trouble with a leaking front cogwheel sealing ring? Change this as well! Learn More -
€0.40Nut crankshaft / inertia wheel Tomos. Pay attention: Do you have a model with an oilpump? In this case you need to order the inertia wheel nut with a connector for the oil pump. Learn More -
€2.50This ring needs to be placed under the clutch housing on the crankshaft of every Tomos. If you forget this ring the clutch will jam. See illustration 2, part number 16. Learn More -
€2.50Clutch cover gasket. For the newer type of Tomos engine blocks with 2 speed (A35/A55) Tip: When mounting it is recommended to grease both sides lightly with liquid gasket, this avoids oil leakage. Better sealing can be achieved when mounting two of these gaskets. See illustration 2, part number 4. Pay attention: This gasket is suitable for engine blocks from before 2003. Since then the gaskets have changed slightly. In doubt? Order the newer type as well, to make sure that you always have the right one in order to continue working on your Tomos Learn More
